Explore TP-Link Deco XE200 – A Tri-Band Wi-Fi AXE11000 Whole Home Mesh System, a High-End TP-Link Deco Whole Home Mesh Wi-Fi System model for your home Wi-Fi configuration. With this Deco Whole Home & Mesh Wi-Fi Systems, it is now possible to eliminate Wi-Fi Dead-zones and provides seamless experience with increased coverage area and number of devices on your existing internet connection.
In order to connect devices to the internet, a modem and a router are required. A modem connects your device to your Internet Service Provider (ISP) and receives information from them. From there, a Wi-Fi router distributes the signal to other devices through wire or wireless, allowing them to connect to the same network. Now using TP-Link Deco Mesh Wi-Fi System or any other Whole Home & Mesh Wi-Fi Systems, one may replace a router, access point and range extender. Mesh routers enable devices in your network to have faster speeds, greater coverage, and a more reliable connection. While traditional routers broadcast Wi-Fi from a single point, mesh Wi-Fi systems have multiple access points.
TP-Link Deco XE200 supports fast speeds and access to the new 6 GHz band when using Wi-Fi 6E devices, resulting in lower latency across your network, even for non-Wifi 6E devices. With WiFi 6E Tri-Band Mesh WiFi, it Combines wireless speeds up to 4804 Mbps over 6 GHz and 5 GHz, and 1148 Mbps over 2.4 GHz.
TP-Link Deco XE200 Mesh Wi-Fi System is a scalable and flexible Wi-Fi system. These mesh Wifi devices work together to blanket your whole home in fast, reliable Wi-Fi and eliminate buffering in every room – with coverage up to 6500 square feet. It has 1 x 10 Gbps port and 2 x Gigabit ports per unit allow you to take full advantage of your multi-gig broadband speed (up to 10 Gbps).
Wi-Fi connectivity – Wi-Fi 6E tri-band (802.11ax); compatible with older Wi-Fi standards. Wired connectivity – 1 x 10 Gbps port and 2 x Gigabit ports per unit allow you to take full advantage of your multi-gig broadband speed (up to 10 Gbps).
Deco XE200 Supports network speeds up to 10.8 Gbps. Designed for More Devices – Extremely Powerful Quad-Core Processor with 16 x high-gain antennas(internal) provides higher WiFi capacity. 16 simultaneous data streams provide the ultimate throughput for your devices-rich network, no more dragging down performance in traffic-dense environments.
Easy Setup and Management – The Deco app helps you set up your network in minutes with clear visual guidance and keeps you in control even when you are not home; Works with Alexa as well Turn on or off Guest Wi-Fi by simple voice commands.
TP-Link Deco XE200 Mesh Wi-Fi Systems are strong enough to handle up to 200+ connected devices, and fast enough to stream multiple 4K videos at a time. Intelligently works behind the scenes to make sure your Wi-Fi remains fast. Walk from room to room on a video call with an uninterrupted signal.
It is easy to setup, and it has Parental Control feature also. It Works with Alexa devices. TP-Link Deco XE200 System has inbuilt Tri-Band router to support all your wireless devices. It has 2.2 GHz quad-core processor.
It Works with all internet service providers, such as Comcast, Charter, AT&T, Verizon, Xfinity, Spectrum, RCN, Cox, CenturyLink, Frontier, etc. (a modem is required for most internet service providers).
4-6+ Bedroom Houses (2-pack) 1-3 Bedroom Houses (1-pack)TP-Link Mesh Technology Optional Ethernet backhaul work together to link Deco units to provide seamless coverage
AI-Driven Mesh Intelligently learns the network environment to provide ideal Wi-Fi unique to your home
16× High-Gain Antennas (Internal) Multiple antennas form a signal-boosting array to cover more directions and large areas
Tri-Band A newly-opened 6 GHz band brings more bandwidth and faster speeds
Beamforming Concentrates wireless signal strength towards clients to expand WiFi range
WiFi Capacity
Very HighTri-Band Distribute devices to different bands for optimal performance
8×8 MU-MIMO Simultaneously communicates with multiple MU-MIMO clients
OFDMA Simultaneously communicates with multiple WiFi 6 clients
16 Streams More than enough bandwidth for connected devices
HomeShield Parental ControlsCustom Profiles Professional Content Filter Library Family Time Bedtime Off Time Time Rewards Family Online Time Ranking Pause the Internet Weekly and Monthly Reports
Deco XE200 (2-pack) 2 Deco XE200 units 1 RJ45 Ethernet cable 2 Power adapters Quick Installation Guide
Deco XE200 (1-pack) 1 Deco XE200 unit 1 RJ45 Ethernet cable 1 Power adapter Quick Installation Guide
Brief about TP-Link Deco XE200 Whole Home Mesh Wi-Fi System:
Manufacturer: TP-Link
Coverage Area: up to 6500 square feet
Router & Satellite Units: 2/3 router units
No of devices to be connected: handle up to 200+ connected devices
Supported speeds: Supports network speeds up to 10.8 Gbps
Wi-Fi Standards: Wi-Fi 6E tri-band (802.11ax); compatible with older Wi-Fi standards; Combines wireless speeds up to 4804 Mbps over 6 GHz and 5 GHz, and 1148 Mbps over 2.4 GHz
Ethernet ports: 1 x 10 Gbps port and 2 x Gigabit ports per unit
Mesh Wi-Fi or Whole Home Wi-Fi systems consists of a main router that connects directly to your modem, and a series of satellite modules, or nodes, placed around your house for full Wi-Fi coverage. They are all part of a single wireless network and share the same SSID and password, unlike traditional Wi-Fi routers.
Mesh Wi-Fi systems are made to cover your large home in Wi-Fi, extending wireless coverage by sharing that network across multiple devices. If you’re finding that the router that worked in your apartment doesn’t give you wireless connectivity you want for your whole home, then a mesh Wi-Fi router is the solution for you.
Features of a TP-Link Deco Wi-Fi System:
WHOLE-HOME COVERAGE – The Deco mesh Wi-Fi system brings up to 9600 sq. ft. of fast, reliable Wi-Fi to your home.
WORKS WITH ALEXA- With deco and an Alexa device, you can easily manage Wi-Fi access for network profiles to take focus away from screens and back to what’s important.
WORKS WITH YOUR INTERENT SERVICE PROVIDER- TP-Link Deco replaces your Wi-Fi router and works with most major internet service providers.
SET UP IN MINUTES – The Deco app guides you through setup and allows you to manage your network from anywhere.
DON’T LET WIFI SLOW YOU DOWN- Get the most from your WiFi by streaming, gaming, and working across your home.
GETS BETTER OVER TIME – Receive automatic updates to help keep your network safe and secure. Online security and additional network management features available via a separate subscription.
TP-Link HomeShield – TP-Link’s premium security service keeps your home network safe with cutting-edge network and IoT protection. Free features: 1. Basic Network Security including Security Scan and IoT Device Identification 2. Basic Parental Controls 3. Quality of Service 4. Basic Weekly/Monthly Reports.
EASILY EXPAND YOUR SYSTEM – With cross-compatible hardware, you can add deco products as your needs change.
Do you need a TP-Link Deco mesh-router system?
Many traditional routers won’t cover large houses with multiple floors and walls that block wireless signals. Additionally, if you’re interested in smart-home features, the easy remote management that mesh routers offer through their mobile apps is a huge plus.
You don’t have to deal with slow internet speeds or gaping dead zones. If you’re tired of constant router resets or antenna adjustments, now is a good time to upgrade to a new traditional router with longer distance capabilities, an deco mesh-router kit.
There are plenty of wireless networking products that can help boost a home Wi-Fi signal, so analyze your Wi-Fi needs to determine which solution is best for your home.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
Hello Friends! If you have any doubts about this post for the TP-Link Deco XE200 – A Tri-Band Wi-Fi AXE11000 Whole Home Mesh System, please let me know through a comment below and if you like this post useful, please do a share on Facebook or Twitter to your friends, so that it may be useful for them also.
